Why is My Nintendo Switch Controller Not Charging?

*As an Amazon Associate, we earn from qualifying purchases

If your Nintendo Switch controllers aren’t charging you might be experiencing a faulty charger or outlet. If you’ve drained the battery your device may need to be repaired. It’s also possible that your joy-cons may have fallen and need to be repaired. There are several ways to solve this issue including replacing the joy-cons or purchasing a new charging grip device. To charge your Nintendo Switch connect the charging grip device to the AC adapter.

faulty outlet

If your Switch controller isn’t charging when you plug it in it’s probably because of a faulty outlet. Check to see if your AC adapter is plugged in correctly. If not it may be time to call an electrician. Alternatively you can unplug your charger and try again. If nothing else seems to help try the following methods:

First check the charging port. Often it becomes clogged after a few months of usage. Try to keep it clean and make sure that it’s not loose inside the socket. If this still doesn’t solve the problem you’ll have to repair it. Another option is to restart your Switch in safe mode. To do this press the power button to boot the console in safe mode. You can then press the volume up and power buttons to power on your Switch.

faulty charger

If your Nintendo Switch controller isn’t charging it might be due to a faulty charger. There are many reasons why it might not be charging and it might be a simple fix that requires no technical knowledge or tools. However the first step to solving the problem is to locate a faulty outlet. In order to solve the problem you can try another outlet or move the Switch to a different room. If you don’t have an outlet check your Switch’s adapter. Make sure to use the original one and not a generic one.

If the problem persists try changing the charger. If the controller is already connected to the Switch it might be loose or faulty. Check whether the Joy-Con controllers are securely connected to the Switch and inserted into their respective slots. A damaged Switch might also prevent the controllers from charging. Check the power adapter to make sure it isn’t damaged. Check for bent pins wires or connections and fix the problem.

drained battery

When your Nintendo Switch controller stops charging due to a low battery you have several potential solutions. First you may have a faulty outlet. In this case you should unplug the device and re-plug it after a couple of hours. If this doesn’t fix the problem you may need to purchase a new charging cord. If all else fails you can try a hard reset or force restart.

If this solution isn’t working you may want to try to charge your Nintendo Switch in a different way. Some people have found that holding the power button for about two minutes is enough to recharge the device. Another method involves using the charging dock while the Switch is off. This solution works great for players who want to play the game but can’t charge the controller. If the battery is extremely low however you may have to use the overnight charging mode.

water-resistant design

In a previous article we outlined the key characteristics of a waterproof Nintendo Switch controller. We noted that a water-resistant controller is crucial for protection against spills and dust. Here we take a closer look at the features that make a controller truly waterproof. We also outlined the different types of cases available for this console. These cases range from simple plastic shells to protective cases made of molded polypropylene.

The case of the Nintendo Switch controller adds a few extra inches to the device but it is also splash proof and water-resistant. It protects the controller from accidental spills water-resistant design and debris in a backpack. A mesh pocket for accessories and a sleeve for up to 10 games can also be found inside the case. The case also props up the Nintendo Switch in tabletop setups.

reassembled controller

If your Nintendo Switch controller doesn’t charge you may have loose connectors between the sides. The power from the Switch doesn’t get to the controllers so they aren’t receiving any charge. This issue affects both the left and right controllers. Before you can fix the controller you’ll need to disassemble the controller shell. This repair will require you to replace the Joy-Con. To complete the repair you’ll need to calibrate the new Joy-Con and reassemble the controller shell.

First clean the JoyCons using isopropyl alcohol. Make sure to use a higher percentage than normal. Next reconnect the JoyCons to the Switch. If they don’t work try power cycling the Switch to see if that solves the issue. After cleaning reconnect them to the Switch. If the issue persists you can try a few other methods such as reassembling the controllers.

Leave a Comment