Why is my JBL speaker blinking red?

*As an Amazon Associate, we earn from qualifying purchases

When adequate USB power is applied, this flashing red light begins to blink white. A JBL speaker flashing red indicates a low battery level. My JBL Flip 5 has all the lights on and I have tried factory resetting it but it doesn’t work I have tried turning it off and it still doesn’t work Note, however, that you can see the first lamp (far left) blinking red. My JBL Flip 5 has all the lights on and I’ve tried factory resetting it but it doesn’t work, I’ve tried turning it off and it still doesn’t work.

Why is my JBL speaker blinking red?

This light never flashes red while charging. My jbl flip 5 has all the lights on and I’ve tried factory resetting it but it doesn’t work I’ve tried turning it off and it still doesn’t work Note, however, that you can see the first lamp (far left) flash red. It only flashes red when the battery is almost empty and AC power has not yet been connected to the speaker. As the speaker charges, more and more lamps light up, and the flashing moves further to the right, until it reaches the last of these five battery level indicator lamps.

This can vary from model to model, but is usually an indication that your speaker needs to be charged. If you notice that your JBL speaker continually turns itself off, check to see if the battery has a charge. If it does, it means that the speaker’s battery is critically low and needs to be recharged immediately. I have a similar problem, the flashing red light does not turn on or off, but it does not charge.

The flashing red light does not charge the battery, I have left it overnight to no avail Sometimes this is the result of a battery that is too cold (below freezing, warm it up). However, my speaker was plugged into the wall when it happened, I simply unplugged it and plugged it back in and it came back on.

The JBL Go red light problem occurs when you charge the speaker or take it off the charger, especially when you charge it with a wall plug. The JBL Go red light problem occurs when you charge the speaker or remove it from the charger, especially when you charge it with a wall plug.

There are five lights that come on in succession as the speaker’s battery charging progresses, as shown in the picture below. My jbl flip 5 has all the lights on and I have tried factory resetting it but it doesn’t work I have tried turning it off and it still doesn’t work. The intensity and frequency of the LED flashing will be different for each JBL model. This does not mean it is charging.

JBL charge 3 charging indicator

Here you can see the five lights on the bottom of the jbl charge 3 that allow you to see the battery life. They light up progressively as the 6,000 mAH battery charges and let you know how much battery life you have left if you’re draining it by playing a lot of games or charging other devices. To prevent the battery from draining completely, they’re designed to indicate this by flashing the red LED. Whether you’re looking for a small portable sound system like the JBL Go 2 that you can take anywhere, or a huge sound system like the JBL Boombox for your events, JBL has you covered.

f the speaker is charging, one of the LED dots will flash to indicate the battery level and charging status. If I have any real complaints about the Charge 3, it’s the really weak documentation supplied by JBL, or whoever is manufacturing it for them. We strongly advise trying out the JBL Charge 3 if you live near a Target store in the US.

The JBL Charge 3 power bank speaker has a cluster of LEDs across its bottom front panel, as shown in the images below. Inside the retail box you’ll find the JBL Charge 3, 5V 2.3A USB power adapter, micro USB cable, and device documentation (quick start guide, safety and warranty cards). Along the front edge of that flat area is a five-LED battery charge indicator, which you can see best in the image below. For longer battery life, it is recommended that the battery be allowed to fully charge before use.

When the light turns solid blue, it means that the speaker’s battery is fully charged and should be unplugged from the mains. Doing so aligns the speakers with respect to your ears so you can hear stereo separation, something the Charge 3, along with almost all similar products, lacks. Since it uses a Micro-USB cable similar to regular smartphones, you can also charge it in the car with a standard USB adapter. The bright orange color of JBL’s wall charger and cable will help make sure it doesn’t get lost or left behind when you’re out and about.

The end view of the Charge 3 and one of its weatherproof diaphragms that pumps out much of the bass. In short, the JBL Charge 3’s battery indicator lets you see the charging progress, and how full the battery is when it’s not recharging. Also, if you’re not using a fast-charging unit, you may not reach full capacity as it’s simultaneously discharging. There are five lights that light up in succession as the speaker’s battery charge progresses, as shown in the picture below.

JBL Go 2 troubleshooting

First, press and hold the power button until the status light on the top front illuminates and the guitar strumming sound plays. Next, the JBL Go 2 emits an ascending electric guitar strumming sound when turned on, and is ready for use after this sound ends. I have solution plug the JBL go 2 into charging the red light will flash indicating charging press the bluetooth volume down button together for 15 seconds and then press the power button for 20 seconds. We cover here the JBL Go 2 reset instructions, to restore this BT speaker to its factory default settings and state.

Please note that after resetting the JBL Go 2, the speaker appears in ready to pair mode, with the status lamp flashing blue rapidly.

References: