How to stop bluetooth speaker beeping

*As an Amazon Associate, we earn from qualifying purchases

On some speakers, this will be followed by a beep to indicate that your cable is not inserted correctly. This means that either the cable is faulty, or it is loose in the port. People have described the beeping as coinciding with the volume being turned up or down, like holding down these buttons. You can also adjust your cable to make sure it fits snugly into the micro-USB port or charging unit it’s plugged into.

How to stop bluetooth speaker beeping

Once plugged in, leave the speaker for a while if the battery is very low to charge. Clearing the Bluetooth pairing list or checking that the power cable is not misconnected or faulty will solve these problems. Since its introduction in 1989, Bluetooth technology has developed rapidly to become the most versatile and low-cost wireless communication technology. Connecting the speaker to a power supply that does not match the recommended power rating of the speaker will damage the speaker.

Many major speaker manufacturers such as Bose, JBL, Sony, Ooontz, Braven, Anker, COMISO, Sonos, FUGOO and others have ventured into Bluetooth speaker production. The rest of the problems are usually solved by resetting the device. A Bose speaker in stereo configuration will beep up on the left speaker and beep down on the right. Consider troubleshooting your speakers with all of the above solutions and let us know which one worked for you.

Sometimes the speaker still beeps when plugged in. Bose headphones and speakers will beep continuously if there is a problem with the power or Bluetooth connections. To fix this, try using a different micro-USB cable. Normally, there will be two beeps (low to high) when the power is connected, and then two beeps (high to low) when it is disconnected.

Since most speakers use a standard Micro-USB cable, replacements are readily available at most electrical stores. You can also clear the Bluetooth pairing list to make sure it’s not a Bluetooth connectivity issue.

Why does my bluetooth speaker keep beeping?

To fully understand the meaning of these beeps, it’s best to read the manual that came with your Bluetooth speaker. After each song, the iPhone adjusts the volume of the next song (let’s say to 120%) and the beeping sound indicates the volume adjustment. The computer is making the beeping noise because there is a problem with the boot circuit or the main power circuit. The best thing to try for this problem is to unlink all the devices from the speaker and re-link them one by one.

Like other Bose speakers, the Sound Dock will also beep when the power supply is connected and disconnected. Another reason your Bluetooth speaker may produce a beeping sound may be to perform a diagnostic test. On most bluetooth devices I have found this type of regular beeping related to being in pairing or searching mode. Reacting to the beeping by disconnecting the bluetooth speaker from the power supply will prevent it from being damaged.

We can also see the battery level in the Bluetooth settings by pressing the notification panel down or long press on the Bluetooth icon. If the beeping persists when using any of the above features and the headset is fully charged, try turning off voice prompts. This happens whenever the battery power is low, even if the charging cable is plugged in, as the beep trigger depends on the battery level. Therefore, when you successfully connect your computer, tablet or smartphone to the Bluetooth speaker, expect a beep.

When you hear a beep from your Bluetooth device, you should make sure not to ignore it. On some speakers, the frequency of the beeps will increase as the battery level reaches the critical point. One of the reasons your Bluetooth speaker may be beeping is that its battery is running low. You can also clear the Bluetooth pairing list to make sure it’s not a Bluetooth connectivity issue.

Normally, there will be two beeps (low to high) when it connects, and then two beeps (high to low) when it disconnects.

References: