Oculus Quest 2 Controller Not Working? Here Are Some Tips

*As an Amazon Associate, we earn from qualifying purchases

Oculus Quest 2 controller not working? Here are some things you can try. Check for firmware updates and clean the tracking cameras. Changing the batteries should also fix the problem. If none of these fixes work try replacing the controller. After these steps your controller should work again. But if they don’t follow the steps above. If they don’t you should contact Oculus support.

Fixing a faulty Oculus Quest 2 controller

One of the most frustrating parts of owning a VR headset is when a faulty Oculus Quest two controller stops working. If this is the case the first step is to contact Oculus support. They will most likely ask you to send a video of the controller malfunction so they can determine the cause and whether to replace it or repair it. Here are some tips on how to solve this problem.

First check the Oculus Quest 2 controller’s batteries. Batteries can become dirty or lose power making it impossible to track your movement. The controller’s batteries may also be loose. If this is the case you can take them to the nearest Meta Support center to have them checked. If you’ve tried checking them yourself you may be able to fix loose pins with a little bit of aluminum foil. However this method isn’t recommended as it may cause further damage to the controller.

Checking for updates

Before you use your Oculus Quest 2 controller check the software version on your device. To do so head over to the Oculus Release Notes and check for the latest release. In most cases this will be the latest version of the software. It is always best to check for updates regularly to prevent problems later on. This article will discuss the basics of checking for updates. Read on to learn more!

Before you go ahead and install new software check the compatibility of the device. A faulty update can make the device not work. Some of the compatibility issues you may encounter are listed below. First make sure your PC is running at least version 7.1. You may also want to check for an update if you have a recent update. In some cases the software is outdated so it is a good idea to check for a new version whenever possible.

Cleaning the tracking cameras

If you encounter an error in tracking while using the Oculus Quest 2 controller you may want to clean the cameras first. Dirt hair and other debris can affect the cameras. They also affect the accuracy of tracking. Fortunately cleaning the tracking cameras can help you fix the error. Here are the steps you can take to do so. Keep reading to learn more about how to clean the tracking cameras and how you can get the most out of your VR experience.

First make sure that you’re using a clean microfiber cloth to clean the lenses. This is crucial because smears and fingerprints can affect the tracking quality. Remove any stickers or decals on the lenses. Finally keep the controller in a bright area to reduce glare. Otherwise you’ll find it difficult to see objects in the room. To avoid this problem you may want to purchase an anti-glare window treatment.

Changing the batteries

The Oculus Quest 2 controller comes with rechargeable AA batteries that can be replaced with a new one. These batteries will last for around 50 hours. If the controller’s batteries run out too quickly you can wrap aluminum foil around the battery compartment to prevent it from breaking. It will also keep the battery in place. The battery is covered under a two-year warranty. It is recommended that you replace the battery when you see signs of wear and tear.

To change the batteries in the Oculus Quest 2 open the battery compartment by pulling it upwards. Locate the AA battery in the battery compartment and replace it. Insert the new AA battery into the controller according to the markings. If the new battery does not work replace it with another one. Make sure that you dispose of the battery properly. If the controller is still in good condition you can try using a new one.

Leave a Comment