Nintendo Switch Not Reading SD Card? Here’s How to Fix It

*As an Amazon Associate, we earn from qualifying purchases

A microSD card for Nintendo Switch does not read? Here are some solutions to this problem. First you can perform a system update on your Switch. If the problem persists you can also try formatting the card. Also you can perform a system update after inserting the microSD card. Lastly you can try to fix a non-working game card by following the instructions given below.

Formatting a microSD card

If your Nintendo Switch is not reading your microSD card there are a few things that you can try to fix this issue. First try to migrate your Switch’s games onto your PC’s internal storage. To do this make sure that you have removed your microSD card first. Next make sure that the game is installed on the computer’s flash memory not the microSD card. Once that is done you can connect your Switch to your PC again.

Another thing you can try is to format your SD card. Although this can cause your Nintendo Switch to not read your SD card it can be used by other devices. If you are not willing to lose your data you can try formatting your SD card. Before you try this though make sure that you backup all of the data on your SD card. If you have any downloadable software on your PC you can redownload them after formatting your card.

Formatting a nintendo switch

There are a couple ways you can format an SD card on your Nintendo Switch. While they are not as intuitive as those on a PC or Mac there are some fundamental steps that you can follow to format the microSD card on your Nintendo Switch. First flip over the console so that the SD card slot is visible. Insert a microSD card into the console’s SD card slot. This will trigger the console to recognize the card and bring you to the System Settings.

If the SD card does not work you may need to format the console to fix the problem. The SD card connector on your Nintendo Switch may be bad. You can check this by pressing the Power button for 12 seconds and then inserting the SD card. Afterwards check to see if the issue is fixed. If not you may have to take your console to a repair shop.

Performing a system update after inserting a microSD card

To perform a system update after inserting a new microSD card into your Nintendo Switch you must first format the microSD card with data. Then perform a system update. The next step involves following the on-screen instructions. Performing a system update will remove any existing data on the microSD card. When the system is ready you will be prompted to enter your PIN and choose the appropriate option.

To perform a system upgrade insert a microSD card into your Raymarine display. Be sure to select a memory card with a memory capacity of 512MB or larger. CompactFlash cards are limited to 128MB and larger cards may cause issues on some early models of the C and E Classic displays. If you experience any unexpected issues after inserting a microSD card you can contact your Raymarine agent to perform a system update for you.

Fixing a non-working game card

If you’re facing a non-working Nintendo Switch game card you are not alone. It can be extremely frustrating to try to get your favorite game back into your system. You can either attempt a DIY fix or send your console to a reputable repair shop. Third-party repair specialists are often cheaper than Nintendo’s own repair team and they may even offer insurance for their repairs. Read on to learn how to fix a non-working Nintendo Switch game card!

First check the connection between the card and the console. If the connection between the two is loose try blowing compressed air into the card slot. Next try reinserting the game card slowly. If this doesn’t work repeat the process with another game card to see if you can get it working. If you still experience a non-working Nintendo Switch game card you may have a dirty game card.

Leave a Comment