JBL Flip 3 wont turn off? Here’s what to do

*As an Amazon Associate, we earn from qualifying purchases

When it flashes blue or shows solid white, the Flip 3 is not currently paired. You can now save it for sale, or pair it again with your favorite Bluetooth devices. When the speaker is off, quickly press and release the power button, as shown in the image below.

For me it’s the same as on the jbl charge 4 now it makes me and my parents nervous so I’m going to remove the battery because there’s no info for it.

JBL Flip 3 wont turn off? Here’s what to do

Then turn the flip 3 back on as described in step 1 above. These jbl flip 3 reset instructions show how to reset this Bluetooth speaker to its default settings. These jbl flip 3 reset instructions show you how to reset this Bluetooth speaker to its default settings. After that, each time the speaker and the device have Bluetooth turned on, pairing will automatically resume.

These JBL Flip 3 reset instructions show you how to reset this Bluetooth speaker to its default settings. Now, most Bluetooth speakers have a power button that JBL places right on the unit so it’s easy to find. These JBL Flip 3 reset instructions show you how to reset this Bluetooth speaker to its default settings. Although the JBL Flip 3 speaker is splash resistant, the buttons may become unresponsive if they’ve been exposed to water for a long time, for example.

These JBL Flip 3 reset instructions show you how to reset this Bluetooth speaker to its default settings. Although the JBL Flip 3 speaker is splash resistant, the buttons may become unresponsive if they have been exposed to water for a long time, for example, if the JBL Flip 3 speaker refuses to turn on or off, resetting the speaker usually solves the problem. These JBL Flip 3 reset instructions show you how to reset this Bluetooth speaker to its default settings.

Although the JBL Flip 3 speaker is splash resistant, the buttons may become unresponsive if they have experienced prolonged exposure to water, for example, JBL speakers do not have a feature where they automatically turn on, so this should not happen. The reset of the JBL Flip 3 is now complete. The speaker will no longer automatically connect to any previously paired Bluetooth devices that are in range and Bluetooth pairing anymore.

By deleting this, the Flip 3 will stop pairing with any nearby Bluetooth devices afterwards. Check to see if you have headphones or an AV cable overridden on what you are trying to connect to the JBL Flip. Press and hold the power button for approximately 30 seconds to reset the device. This clears any previously paired Bluetooth devices from its memory.

When to reset

In addition, you can reset it to prepare the speaker for sale or re-gifting, or to prevent it from pairing with devices you no longer want it to pair with. The device may start working after the reset. Follow the instructions in this post to reset the Flip 3 to its factory default state. The reset restores the unit to the factory default state.

See the image below. If you find that your JBL speaker keeps turning itself off, check to see if the battery has a charge. We recommend that you contact JBL if you are not comfortable doing a teardown to remove any possible debris. The JBL Flip 3 then runs its reset routine, as shown in the image below.

This turns the Flip 3 on, and the unit is fully powered up several seconds later. We know this because the power button lights up solid gray, rather than flashing blue. Note that all lights illuminate for a couple of seconds while the reset takes effect. To reset automatic Bluetooth pairing, manually pair the Flip 3 with a device.

The unit will be ready for use when this sound is finished. Here’s how to turn off the JBL Flip 3 portable speaker. You can restart the JBL Flip by pressing and holding the volume up buttons for a few seconds. The Flip 3 emits an ascending electric guitar strumming sound when turned on.

Note that the power button flashes blue to indicate this, as shown in the image below. Press and release the power button, as shown in the image above.

The lights on the JBL flip 3 do not go out – the Fix

Underneath are five small LED lights that indicate how much battery charge is left, and further down, there’s an AUX input and Micro-USB charging port hidden behind the sealed flap. If you haven’t previously paired the JBL Flip 3 speaker with another Bluetooth device, the device will boot into pairing mode whenever it’s on until you do.

Using the power button on the top of the speaker: this is the most obvious and easiest way to turn off the JBL Flip 3 Bluetooth speaker. If your JBL Flip 3 speaker refuses to turn on or off, restarting the speaker will usually solve the problem.

It is likely that the charging cable or port is faulty; therefore, your Flip 3 is not receiving enough power when plugged in. Press the volume up ( ) and play button – When your JBL Flip 3 is on, press and hold the volume up ( ) and play buttons simultaneously until you see all the lights go out.

And, like other similar JBL speakers, you can play any audio media from Bluetooth-enabled sources, such as smartphones, tablets, and Bluetooth-enabled computers and laptops. If someone has previously paired the speaker with another device and you want to pair it with another device, press and hold the “Bluetooth” button on the JBL speaker.

I recently updated my flip 3 speaker through the jbl connect app and after the update it told me to restart my speaker. Unlike previous speakers which had all the buttons along the top, the JBL flip 3 has them embedded in the fabric and plastic part of the back.

Upgrading the JBL flip 3 to the latest version can not only add functionality and make it possible for the speaker to work with other devices, but it can shore up issues that were discovered after the device was released. It’s a bit of a hassle, I literally just got my jbl flip 5 and had a hard time finding an Amazon seller that ships overseas (I currently live outside the US).

If you haven’t previously paired the JBL Flip 3 speaker with another Bluetooth device, the device will start in pairing mode whenever it’s on until you do. On the other hand, if someone has previously paired the speaker with another device and you want to pair it with another device, press and hold the Bluetooth button on the JBL speaker.

It’s been 6 hours of charging, but only two indicator lights are not flashing and the third one is still flashing. If you are experiencing problems with your JBL flip 3, such as charging issues, unresponsive buttons or Bluetooth connection issues, and your device has recently suffered excessive exposure to water, this may be the source of your problem.

JBL Flip 3 won’t charge

It’s new and on it’s second charge and the first light comes on when plugged into power and flashes but after letting it charge for an hour or two the same light keeps flashing and when trying to turn it on the red light comes on and then goes off again.

If the plugs seem to be in good condition, check the charging port for dust and debris and clean it with a thin object like a safety pin. I’ve had my speaker plugged in for hours, it doesn’t make the normal charging indicator lights, only when I turn it on does the red light appear. My flip 3 won’t stay on and plays for a short time and starts making annoying noises until it turns itself off.

Although the jbl flip 3 speaker is splashproof, the buttons may stop responding if they have experienced prolonged exposure to water, for example. This will restore the default system settings and resolve the software-related charging issue. If your speaker no longer holds a charge for a long time, it is most likely because the battery has exceeded the number of charge cycles for the lithium-ion battery. If there are exposed wires in the charging cable, or if the charging cable has suffered some trauma, then the problem may be with the charger and not the device itself.

JBL speakers are an excellent brand, and experiencing battery issues with anything designed to be portable is extremely inconvenient. Since JBL speakers are an electronic device, it’s likely to have hardware or software glitches that are preventing it from charging. If you haven’t previously paired the JBL Flip 3 speaker with another Bluetooth device, the device will boot into pairing mode whenever it’s on until you do. It’s pretty annoying when your expensive JBL speaker suddenly stops charging with signs of physical damage.

But if you’ve been using your JBL speaker for more than five years, it’s time to check it out or replace it with the latest model like the JBL GO2, jbl flip 5, jbl charge 4, and JBL Boombox. The JBL Flip 3 Bluetooth speaker is a splash-proof device that can add some much-needed pop to the audio played from connected devices. If you haven’t previously paired the JBL flip 3 speaker with another Bluetooth device, the device will start in pairing mode whenever it’s on until you do. If you notice that your jbl speaker won’t fully charge, it’s usually due to a fault with the charging port or cable.

To reset your JBL speaker to charge, press and hold the play, pause and volume up buttons at the same time until the power button illuminates. You can reset the speaker to the JBL by pressing and holding the Bluetooth and volume down buttons for 5 seconds. If your JBL Bluetooth speaker won’t charge and when you check it with other cables it won’t charge and you are sure your power outlet is working.

References: