It will not “ignore” the device. Your device does not have a direct button that allows you to forget a device, so you have to restart the phone to retrieve the forgotten device. First try turning on bluetooth on the phone and then turn on bluetooth discovery mode on the device. Firstly, tap on the Settings app and then tap on the Bluetooth panel.
How to unforget a Bluetooth device
Now tap the “Forget this device” button, and your iOS device will remove it from the list of previously connected Bluetooth devices. One of those should do it, or a reboot on the phone before trying again. Some people on Apple’s support forums recommend turning off the iPhone or iPad and then restarting it to see the list of previously paired devices. Change the option from “Automatically” to “When last connected to this iPhone”.
To communicate between your devices, Bluetooth sends signals over a 2.4 GHz radio frequency. Once a device is forgotten, it won’t reconnect until it’s paired again. Wi-Fi is perhaps the biggest and most problematic example, as are other Bluetooth receivers and devices, which can interfere with each other. At the top of the page, you’ll see the Forget this device option, which will completely unpair the AirPods from your phone, effectively restarting them.
Pairing your device with a Bluetooth accessory And when your laptop, phone, or other device is connected via Bluetooth to a wireless speaker or pair of headphones and audio playback starts to stutter, it can be little short of infuriating. Often, this is due to a partial disconnection or signal interruption between the two wireless points. They should see each other. Try turning your phone’s bluetooth off and then back on again.
This becomes problematic when other nearby devices are also using that frequency. Here, you’ll see several options, including Reset DRM, Reset App Preferences, Reset All System Settings, Reset Factory Data, and Reset WiFi, Cellular, and Bluetooth. You need to put the device into pairing mode, as Tim said. If that doesn’t work, try searching your Bluetooth device’s manual online to find the Bluetooth code.
If none of those steps work, you should unpair the AirPods from your device, restart the AirPods, and try to reconnect them. Find the device that you want to ignore and tap the blue circle with the right arrow. You’ll need to put the bluetooth device back into discovery mode for the iPhone to see it. To do this, open your phone’s Settings and scroll down to “System”.
AirPods can’t be locked through the Find My iPhone app like other Apple devices, making them easier to steal than your other Apple products. If, after resetting your network settings, your device still won’t connect, you need to try turning it off and on. Now tap the “Forget this device” button, and your iOS device will remove it from the list of previously connected Bluetooth devices. To unlatch the device, you have to reset the network settings.
If that doesn’t seem to work, then after turning both off, turn on discovery mode on the device first, then turn on bluetooth on the phone. If that doesn’t seem to work, then after turning off both, turn on discovery mode on the device first, then turn on bluetooth on the phone. Tap the “i” (info) button next to the name of your AirPods. If your Android device still won’t connect to a device after you reset your network settings, you can try a factory reset.
Scroll to “Connect to this iPhone'” and tap it.
How to find a bluetooth device after you’ve forgotten it
This is a simple troubleshooting process that you can try with any device to fix minor issues with your device’s software. If you have a Bluetooth speaker, headset or headphones, locate the switch or button and disable pairing and then turn it on. Once the screen turns black, press and hold the volume down button and at the same time press and hold the side button.
Low volume on a Bluetooth device is pretty common. If you have previously connected your Bluetooth accessory to your iOS or iPadOS device, unpair the accessory, put it back into discoverable mode, and then try to pair and connect it again.
The process is simple and allows you to back up your information and just undo any settings you may have made in the past few days. You can also forget when there are problems with Bluetooth connections, and you need to reconnect the two devices. When you turn it off and on, try connecting your device again to see if the problem is fixed. If you hold down the volume down button for too long, you might see the Apple logo appear on the screen, and this means you need to repeat the process from the beginning.
Wait about 30 seconds after the iPhone turns off and press and hold the power button again to turn it back on. Your phone won’t have the memory of forgetting the device and therefore will find it easily after the scan. There hasn’t been an infomercial or cool gadget that I haven’t at least thought about buying and trying. If the device doesn’t appear in the list of previously connected devices, you can search for available devices and reconnect it.
The reset process may take a few seconds, but it will return your Bluetooth and WiFi to factory settings. To do this, press and release the volume up button on your phone and then press and release the volume down button as fast as you can. Note that DFU mode will erase all the hardware or software code on your phone and allow you to start over. After turning Bluetooth off and back on in any of these ways, try pairing your iPhone and Bluetooth device again to see if the problem is fixed.
The easiest way to forget Bluetooth is to reset your network settings and then try to reconnect your Bluetooth device. If you can pair your accessory with some devices but not with your iOS or iPadOS device, unpair the accessory from your other devices. After unsuccessful attempts to fix this, I opted to forget this device with the intention of repairing the phone to the car. From there, enter your accounts and anything else you need on your phone and then reconnect your Bluetooth device.
Once you put your iPhone into DFU mode, you’ll be able to restore your factory settings, and you can reconnect all your forgotten Bluetooth devices. If your android device still won’t connect to a device after resetting the network settings, you can try a factory reset. To turn Bluetooth on, open the Settings app, tap on Bluetooth and turn on the switch next to Bluetooth (the switch will be green when it’s on). However, there are times when you don’t want to stay connected and opt to disconnect and forget a device.
Count for five seconds and release the side button, but keep holding the volume down button until you see your phone in Finder or iTunes. If after trying all of the above you still can’t connect to your Bluetooth, you need to try a deep restore process. The bluetooth device list does not contain an i for the item, and there is apparently no other way to disconnect. Your Android or iOS device doesn’t make it easy for you to forget a device, but you can still do it.
Sometimes, the reason your device won’t connect is because there’s a small software issue preventing it from connecting. In the case of the iPhone, hold down the power button and slide the button that appears on the screen to turn it off.
How to forget your bluetooth device
If you want to reconnect your iPhone or iPad with the device, you’ll need to put the Bluetooth device in pairing mode to do so. Right now If you’ve previously connected your Bluetooth accessory to your iOS or iPadOS device, unpair the accessory, put it back into discoverable mode, and then try to pair and connect it again. Once you connect your AirPods to a device that’s paired with your iCloud device, it automatically recognizes other devices connected to it, like iPads, iPods, Macs, and your Apple Watch. Even if your AirPods are on and paired with your device when they’re stolen, they lose connectivity with your device once your AirPods are out of range.
If you get sick of scrolling through a long list of other people’s computers in your office, for example, you can simply set your iOS device to forget about the ones you don’t want to deal with. If you’re having trouble getting your AirPods to connect, make sure your AirPods are charged, Bluetooth is turned on for the device you want to connect, and restart your device before trying again. However, to establish a solid connection, Bluetooth devices must be within 5 feet of each other. The device discovers the module and displays it as RN52-XXXX, where XXXX is the last 4 digits of the module’s MAC address.
AirPods cannot be locked through the Find My iPhone app like other Apple devices, making them easier to steal than your other Apple products.