How to reset JBL speaker

*As an Amazon Associate, we earn from qualifying purchases

This is the last step you need to do to finally make sure your JBL Link 10 speaker has been reset to its factory state. Resetting the JBL Flip is simple, press and hold the volume and play button while the system is on for approximately 5 seconds.

Resetting a JBL speaker is easy, even if it doesn’t look like it, no need to look at the manual or search the internet for how to do it. To make sure your JBL Clip 3 speaker has been fully reset to factory default or not, turn it back on by following the power-on steps.

How to reset JBL speaker

If you see that your speaker’s functions have converted right back to a new JBL Clip 3 speaker, then the reset is complete. The device will turn off, and when you turn it back on, the speaker will return to its factory settings. To reset the speaker, press the volume up button (the button) and the Bluetooth button at the same time and hold it down until the rings around the buttons light up. If the Bluetooth power lights come on, then you’ve reset the speakerphone.

Now, press the volume up sign ( ) and the Bluetooth sign together. If it turns off, it means you’ve already reset it to factory settings. However, there are a few things you can try before attempting to reset any of the JBL speaker models. Apparently, if your problem is that the JBL speaker won’t turn on, resetting can’t be the solution.

Let the speaker turn off and then turn it on. Again, to check if it has actually reset, press the power button and turn on the JBL Pulse 3 speaker. Remember that refreshing and factory resetting your JBL speaker will erase all previously paired devices. Press and hold until the JBL Go 2 automatically turns off.

The flashing status lamp on the JBL Clip 3 speaker indicates that the JBL speaker is being factory reset.

How to reset the jbl speaker

If you want to know how to reset your JBL speaker to its default settings, these instructions will provide you with that information. If you feel that your settings have become like new with no previous memories, then you have successfully reset your JBL Pulse 3 speakers. You can reset your speaker by pressing the volume up (the button) and play buttons at the same time. If you’ve read the above procedures, you already know that once you factory reset almost all JBL speakers, previously paired devices will be erased from the speaker’s memory.

In fact, after factory resetting most JBL speakers, previously paired Bluetooth devices will be erased from memory. The flashing status lamp on the JBL Clip 3 speaker indicates that the JBL speaker is being reset to its factory state. Note, as stated above, that after a factory reset, the JBL Clip 3 speaker, like all other JBL speakers, will completely forget previously paired devices and will not pair with them again after the reset. When you try to connect your device to a JBL Bluetooth speaker, make sure the device supports profiles.

On some other models, you have to press both the volume up button (the button) and the Bluetooth button at the same time, while on others you have to press and hold the mute button. Resetting all JBL speakers is quick and easy once you know the correct combinations of buttons to press and how long to hold them down. To reset a JBL speaker, you may need to press and hold the volume up and play buttons, depending on your specific JBL speaker model, such as on the JBL Flip 5.

References: