If you’re wondering how to remove conductive thermal paste from CPU pins read this article. You’ll learn how to remove it using isopropyl and hand sanitizer. This way you’ll have no trouble reinstalling your CPU. Follow these steps to get the best results! Here are a few things to keep in mind before applying thermal paste to CPU pins.
Using conductive thermal paste on CPU pins
Using conductive thermal paste on CPU pin traces prevents your CPU from overheating. The purpose of thermal paste is to eliminate any air gaps between the chip and the heat sink and increase the efficiency of heat conduction. Copper or aluminum are better materials for heat conduction than air but they don’t transfer heat as efficiently as thermal paste. The type of thermal paste you use depends on the type of CPU you have.
While most thermal paste is non-conductive some special kinds are. Graphite-based thermal paste is a good option for CPU cooling but it is not conductive. Thermal paste gets everywhere inside a computer’s case and is very difficult to remove. Instead of using thermal paste you may want to consider installing an alternative thermal pad like the Innovative Cooling Graphite Thermal Pad.
Before using conductive thermal paste on CPU pins you should always be sure that the CPU is properly socketed. If the pins are not straight they might get bent while mounting the CPU. If this happens you can try to straighten the pins by using a needle credit card or mechanical pencil. However if the bent pins are too stubborn you can resolder them.
Using isopropyl to remove conductive thermal paste
Using isopropyl to remove the conductive thermal paste from CPU pins is a great way to improve the overall performance of your computer. However this process can be nerve-wracking if you don’t follow a few simple rules. For example you should avoid bending the pins since this can cause damage to your motherboard and CPU. You should also avoid pushing thermal paste too hard as this can result in bending the pins.
Alcohol rubs are another option but you should always make sure that they don’t contain any added oil. Another solution that is not recommended is water. Although water can be used for cleaning thermal paste it doesn’t evaporate as fast as alcohol. Water can also damage CPU components if it is too much. Alcohol is not conductive so it won’t harm them when reassembled.
Fortunately most modern thermal pastes are made without metal that conducts electricity but liquid thermal compounds can. If you accidentally spill some of this paste on the CPU you’ll have to clean it up yourself and the process is easier than you think. You can also use a soft toothbrush to clean CPU pins. Dip the toothbrush into isopropyl alcohol and wipe away the residue with a tissue between wipings.
Using hand sanitizer
Hand sanitizer is a disinfectant with a high alcohol concentration and is meant to kill germs and protect against harmful pathogens. It contains 80% alcohol and is safe to use on skin and a variety of surfaces. It is widely used in the manufacturing industry and is an effective solution for cleaning CPU pins. If you have sensitive skin you can choose unscented hand sanitizer.
It is very similar to rubbing alcohol and evaporates within a short period of time leaving no residue. However it is important to only use the sanitizer on the IHS (insulation high-sides) of your CPU and not on exposed copper or circuitry. Never use too much hand sanitizer as it could cause damage to the CPU or motherboard.
You can purchase personalized hand sanitizer in bulk or mini sizes. These sanitizers can be given away as giveaways during trade shows marketing events and other similar occasions. You can give away one antibacterial spray to visitors after they register for an email list or attend a demonstration. After the initial recipients use it they may also spread the word about your hand sanitizer. This will help you expand your brand beyond the event.