Bluetooth headphones sound muffled? Try this

*As an Amazon Associate, we earn from qualifying purchases

You need to replace them with new headphones. If that doesn’t fix it, try changing your zone or environment. Now, this problem may depend on the type of headphones you have. However, if there are problems with the codec, then this problem cannot be solved.

Bluetooth headphones sound muffled?

When there are problems with the port of your device, you can use some isopropyl alcohol to clean the connector. After extensive research on Google, I found that this seems to be because the Bluetooth protocol, as it stands now, does not provide enough bandwidth for the headset to use the microphone and high quality audio at the same time. If you have a wired headset, just check the port and connection. Even if your headset uses the AAC codec when you first connect it, it may switch to a lower quality codec if you open an application that uses microphones.

Before doing so, be sure to turn the device off, and after cleaning it, keep it off for an hour or so. For Bluetooth connectivity issues, try charging the Bluetooth headset first. I can’t accurately describe the frustration I feel when I sit down to relax only to find that I put on my headphones and hear almost nothing. Especially if you have expensive, high-end headphones, you’ll definitely want to fix them instead of buying new ones. Here’s how to fix your audio problems.

If your problems seem to be tied to that specific speaker or set of headphones, focus your attention on that hardware. Headphones are especially susceptible to audio muffling due to earwax buildup in front of the speaker grille. Troubleshooting connectivity issues is fairly straightforward and obvious. Turn down the volume and see if the music is still distorted; if it sounds fine, your speaker is probably underpowered for the volume you need.

Because a lot of the time it’s just connectivity issues. In the case of wired headphones, muffled audio can be due to a loose connection to the audio. Please don’t jump to conclusions that your headphones are broken when they sound muffled. Therefore, you should know what you have and whether that is enough to protect your headphones from water damage or not.

If the sound quality is reduced when using Bluetooth headsets with your Mac, quit any application that uses the Bluetooth headset’s microphone and make sure the Sound pane in System Preferences is not open. If the sound quality is reduced when using Bluetooth headsets with your Mac, exit any application that uses the Bluetooth headset’s microphone and make sure the System Preferences sound pane is not open. With any luck, one of the many troubleshooting steps above should get your Bluetooth headset working again.

Here’s why your bluetooth headset sounds muffled

If the connection is still unstable after cleaning the headphone jack, it could be due to corrosion. If your headphone jack is not properly connected to the audio port, the sound quality will be inconsistent. Ya, for my headphones in general, I would just disconnect the bluetooth from the top bar of the headphones and then plug them back in and it would work. If the Stereo option is not available, you can follow these steps to reconnect the bluetooth device.

Muffled or distorted sounds can easily ruin any listening experience, and can make you search tirelessly for the cause of the problem. If you listen to music or other audio through your Bluetooth headset, and then open an app that uses the Bluetooth headset’s built-in microphone, the audio quality and volume are reduced. Unfortunately, if your sound problems are caused by codec incompatibility, there’s no way around it. For some unknown reason, sometimes when I connected my headset to my computer, the sound would become horrible, even if I wasn’t using its microphone.

While Bluetooth is at a natural disadvantage to wired headphones, despite what my colleague says, sometimes it just doesn’t sound as good as it’s supposed to. Obviously, this means boosting the bass, with some changes to the mids and treble to preserve sounds that normally get lost in the shuffle. If you’re getting poor quality sound from your Bluetooth headphones or headset, it’s possible that the low quality option is selected. If you can’t avoid the noise, you can get closed-back headphones, foam-tipped in-ear headphones, or active noise-cancelling headphones.

But essentially, you can turn down the emphasis of certain note ranges to make your headphones sound more to your liking. Either way, you’ll be blocking or destroying more noise, so you’ll have less to worry about when junk sounds reach your ear. Rain, spilled drinks, dropping your headphones in a puddle or lake, and high humidity are some of the many possible sources of moisture exposure to your headphones.

References: